Sunday, November 26, 2006

Combat Wings XE2 info

XE2 4-spar version.

Motor: JustGoFly 400DF, Max power 220W (20A at 11.1V/3S), 3000Kv, 46g (1.6oz), Screw spacing is 16mm by 19mm diagonal, Power range is 7.4/2S to 14.8V/4S, 3mm shaft. JustGoFly M5 slim-style collet.

Prop: APC 5.25 x 4.75 (with this prop, max power of 220W is exceeded (285W) so do a cool-down run (quarter throttle for 30 secs) before landing the plane).

ESC: Castle Creations Phoenix 25

Battery: TP extreme 2200-3SX, 2200mAh, 25C (55A) continuous, 30C (66A) sustain, 50C (110A) burst, 170g (6.0oz), 4 pin balancer connector.

Battery2: TP 2100 3S (old generation), 10-12C (21-25A) continuous, 15C (31A) burst.

Hitec HS-311 standard-sized servos (to help add weight to nose).
Hitec Electron 6 receiver, dual-conversion.
Channel 1: Right elevon
Channel 2: Left elevon

3M bidirectional strapping tape ("Extreme" type)
Solite covering on the bottom.
Trick RC colored tape on the top.
Trick R/C Tape Hinge on top of ailerons (3M Gift Tape on bottom of ailerons).
JustGoFly pusher motor mount, aluminum.
3M 77 spray glue
Gorilla glue and low-temp hot melt glue for joining wing cores.

0 Comments:

Post a Comment

<< Home